You are using an outdated internet browser. This site has been optimized for Internet Explorer version 7 or higher. Please update by clicking
here
Skip to content
Skip to main navigation
Skip to 1st column
Skip to 2nd column
GE Measurement & Control Solutions
Follow us:
Sales Offices |
Sitemap |
Mobile Apps  |
English
Deutsch
Chinese
French
|
Products
Industry Solutions
Services and Support
News and Press
About Us
Contact Us
Home
>>
Ultrasonic Transducer Guide
>>
Select By Application
- Ultrasonic Transducers
Select By Application
Straight Beam Protective Face
Testing square profiles with the probe B4S
Testing of wheel set axles for cracks with the probe MB4S and plastic wedge
Testing for production flaws on large plastic rods with the probe B1SL
Testing melting tank blocks for cavities with the probe K0.5S
Straight Beam Wear Resistant
Testing the adhesive bonding between the outside skin and the honeycomb structure of a composite material (honeycomb part) with probes G1N or G2N
Testing of friction welds on valves with probe K4N
Bond testing between white metal and steel with probe K2K or K5K
Detection of pore clusters in ceramic plates with probe MB4F
Straight Beam TR
Testing brass rods for core flaws with probes SEB1 or SEB2-0°
Testing sintered metal rings for concentric cracks with the probe MSEB-4
Remaining wall thickness measurement on tube bends with probe MSEB5
Testing the soldered joint between faucet and tube with probe SEB10KF3
Angle Beam
Thermit weld testing on rails with probe WB45-1 in the tandem technique
Testing a 12mm thick flange weld with the angle beam probe MWB80-4
Testing an aluminum wheel rim for cracks with the angle beam probe MSW-QC5 and QC-X45
Weld testing of a Ni pipeline with probe WRY70
Angle Beam TR
Testing a weld for penetration with angle beam TR probe VS45
Testing aluminum rings for inside longitudinal cracks with the angle beam TR probe VS60
Testing austenitic welds on tubes with the angle beam probe VRY60
Weld testing on pump housings with the angle beam probes VSY45 and VSY70
Immersion
Detection of porosities in the end zone of brass fittings with probe H5M
Detection of pore clusters in the rubber of absorbers with probe H2K
Detection of cracks in the inside web as well as density changes in the outside wall of SiC profiles with probe H10M
Measurement of crack progression with tension crack corrosion on aluminum with probe IAP 50.3.2
