Print

NTC Type MA - Biomedical Chip Thermistors

NTC Type MA - Biomedical Chip Thermistors

Biomedical Chip Thermistor. Designed for use in catheter assemblies these sensors are available with nominal resistance values of 2252, 3000, 5000, and 10,000 ohms at 25.



Although low in cost, these highly stable, precision thermochips provide the reliability, tight interchangeable
tolerances, geometries, and fast response times that are often required.


A complete line of standard sub-assemblies is available. Continuous research and development efforts within Thermometrics have resulted not only in these field proven designs, but in the development of our Unitherm Thermochip Thermistor, designed exclusively for biomedical applications in the range of 32°F to 122°F (0°C to 50°C) .
Although low in cost, these highly stable, precision thermochips provide the reliability, tight interchangeable tolerances, geometries, and fast response times that are often required. Thermometrics employs experienced applications engineers who welcome inquiries, whether for assistance, or to help with your design requirements concerning new and existing applications.
Our Biomedical Chip Thermistor assemblies are designed for use in applications involving both intermittent and continuous patient temperature monitoring. Repeatability and fast response are essential not only for the intermittent temperature requirements associated with oral and rectal fever measurements, but also with the continuous monitoring often necessary during induced-hypothermia and general anesthesia, or when employed in the care of infants and premature babies. Intensive care units along with recovery rooms have also adopted patient temperature as part of their vital sign monitoring procedures. Temperature monitoring for skin surface, tympanic, esophageal, foley catheters and biofeedback applications has also improved due to the high stability and tight interchangeable tolerances designed into each Thermometrics’ Biomedical assembly.
MA100

Designed for use in catheter assemblies, these sensors are available with nominal resistance values of 2252, 3000, 5000, and 10,000 Ω at 77°F (25°C). Close monitoring of manufacturing processes allow GE to maintain tight interchangeability tolerances with volume production. Typical design parameters are represented in Assembly Type table.
0.030 in (0.76 mm) (10 KΩ only) and 0.050 in(1.27mm) diameters available with kapton sleeve only. 0.070 in (1.78 mm) diameter normally supplied with molded plastic tip.

 

ntc-ma-1

MA200

Intermittent body temperature measurements are common practice in all phases of patient care. This assembly is ideally suited for the disposable cover oral and rectal fever thermometers in use today. It features rugged construction with tip sensitive shaft assemblies exhibiting resistance values of 2252, 3000, 5000, and 10,000 Ω at 77°F (25°C). Refer to Assembly Type table for typical design parameters.

 

ntc-ma-2

MA300

Routine continuous patient temperature monitoring is now feasible by using the convenience of the patient’s skin site as an indicator of body temperature. The stainless steel housing used is suitable for both reusable and disposable applications, while maintaining maximum patient comfort. Nominal resistance values of 2252, 3000, 5000, and 10,000 Ω at 77°F (25°C) are available. Refer to Assembly Type table for typical design parameters.

 

ntc-ma-3

Assembly Type

ntc-ma-4

Thermal Response Time (63% Response)

ntc-ma-5

Tolerance Code and Temperature Range

ntc-ma-6

Data

Our biomedical series thermistor chips and sub-assemblies are designed to be interchangeable over a 32°F to 122°F (0°C to 50°C) range. Best overall stability is maintained when exposure and storage temperatures remain below 158°F (70°C).

Resistance vs Temperature

ntc-ma-7

Ordering Information


ntc-ma-8

Descriptions English
NTC Type MA - Biomedical Chip Thermistors Brochure NTC Type MA - Biomedical Chip Thermistors Brochure
Sensors for healthcare Sensors for healthcare
Temperature resistance curves Temperature resistance curves
Thermometrics temperature sensor solutions Thermometrics temperature sensor solutions


acrobat-reader