Temperature Sensors & Probes

Cable Probe Temperature Sensors

Cable Probe Temperature Sensors are designed for industrial HVACR applications, typically strapped directly to the measurement surface or positioned in a ‘dry well’.

Self-Adhering Surface Temperature Sensors

Self-Adhering Surface Temperature Sensors are designed for industrial HVACR applications, typically for placement on the external wall of a water tank or boiler reservoirs.

Pipe Clip Temperature Sensors

Pipe Clip Temperature Sensors are designed for industrial HVACR applications with the ability to mount directly to a metallic pipe

NTC Type JB Oven Sensor

Glass-encapsulated thermistor housed in a stainless steel probe body with PTFE leadout wires, terminated with a connector assembly.

NTC Interchangeable Type 95 Series
Epoxy-coated, NTC interchangeable thermistor chips with bare tinned-copper lead wires.

Mid-Temperature Range Probe
This probe works in a variety of temperature applications in the appliance and industrial segment.

NTC Type JD Fast Response Sensor
NTC thermistor assembly in a metal housing with flying wires.

Turbidity Sensor - TSD-10

The TSD-10 module measures the turbidity (amount of suspended particles) of the wash water in washing machines and dishwashers.

Turbidity Sensor - TST-10

The TST-10 module measures the turbidity (amount of suspended particles) of the wash water in washing machines and ishwashers.

Glass-encapsulated thermistor housed in a resin tip which is bonded to zip PVC leadout wires.

Chip thermistor housed in a tip, which is molded onto flexible circular cable.

NTC or PTC chip thermistor on a ceramic/metal shoe assembly sealed in a polymer housing and provided with flexible twin cable connections.

NTC chip thermistor with insulated flexible wires and housed in an eyelet tag.

Surface mount cup for use as skin sensors or on flat surfaces.

The meat probe sensor is used to measure the temperature of cooking foods. Suitable for home appliances and microwave ovens.

NTC Type FP Fastip Probe

The NTC Type FP Series Fastip Thermoprobes are ideally suited for high speed measurement and control of fluid temperatures, fluid level or flow.

Type S/AS/ES Precision NTC Temperature Standards
Our temperature standards consist of ultra-stable thermistor probes assembled into thin wall stainless steel housings with shielded extension leads.

Type CSP NTC Temperature Standards
The Type CSP Temperature Standards are ultrastable probe thermistors which have been calibrated to an accuracy of 0.01°C.

NTC Thermistors - Glass
We offer a wide range of hermetically sealed glass thermistors.

NTC Thermistors - Assemblies

Combine the best features of our thermistors in a custom assembly.

NTC Thermistors - Epoxy

Epoxy coated thermistors offer good stability and robustness.

Cryogenic thermistors designed for use in extreme temperature ranges to boiling point of Liquid Nitrogen.

NTC Thermistors - Radial lead
Radial leaded NTC Thermistors offer wide resistance, beta and dimensional image.

NTC Thermistors
Surface mount devices. Choose from a wide selection of resistances and beta values.

ZTP-015 IR Sensor
TO-41 Package. FOV 100°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-5 Package. FOV 50°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-5 Package. FOV 55°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-5 Package. FOV 56°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-18 Package. FOV 85°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-5 Package. FOV 86°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-5 Package. FOV 86°. This thermopile sensor is used for non-contact surface temperature measuring.

TO-18 Package. FOV 85°. This thermopile sensor is used for non-contact surface temperature measuring.

ZTP-315
TO-5 Package. FOV 75°. This thermopile sensor is used for non-contact surface temperature measuring.

Analog output. FOV 5.5° (horizontal), 6° (vertical). The ZTP-115M is a single IR module used for non-contact surface temperature measuring.

I²C Interface. FOV 5°. The ZTP-115ML is a single IR module used for non-contact surface temperature measuring.

I²C Interface. FOV 54° (horizontal), 14° (vertical). The ZTP-188MA 1 x 8 IR module is used for non-contact surface temperature monitoring.

UART Interface. FOV 26° (horizontal). The ZTP-188ML 1 x 8 IR module is used for non-contact surface temperature monitoring.

ZTP-315MIH
Analog output. FOV 9°.  This thermopile sensor is used for non-contact surface temperature measuring.

NTC Inrush Current Limiter - Thermistors
Disc thermistor with uninsulated lead-wires.

MA700 Series Temperature Probes
These reusable temperature probes are ideally suited for the critical sensing parameters in continuous monitoring of a patient’s body temperature.

MA400X Fully Autoclavable Temperature Probes
The MA400X Series has been designed for Steam Autoclave Sterilization temperatures up to 273.

NTC Type A990 Series Thermistors
Interchangeable sub-assemblies consisting of matched pairs of glass encapsulated thermistor beads connected in series or parallel circuit configurations.

Type S/AS/ES Precision NTC Temperature Standards
Our temperature standards consist of ultra-stable thermistor probes assembled into thin wall stainless steel housings with shielded extension leads.

M1000
Adhesive Mounted Surface Sensors
Features a surface mount cup for use as skin temperature sensors or on flat surfaces.

Type CSP NTC Temperature Standards
The Type CSP Temperature Standards are ultrastable probe thermistors which have been calibrated to an accuracy of 0.01°C.

NTC Type AB6

NTC Type AB6 thermistor assemblies consist of small GC or Thermobeads that are welded to insulated extension leads.

NTC MA Biomedical Chip Thermistors
These biomedical chip thermistors are designed for use in catheter assemblies.

Type PRE/K
Thin-Film Platinum Resistance Elements.

Type YQ Series
This series includes a range of RoHS-Compliant PTC thermistors.

Automotive Temperature Sensors
Sensors for for both engine management (including battery temperature) and HVAC temperature applications for automotive and heavy duty truck applications.

Type KY2 & KY3 NTC Thermistors
These contain one PTC and two NTC thermistor elements connected inside a plastic sleeve and encapsulated in a brass probe housing.

Active Incar Sensor
This sensor indicates the cabin temperature of the fully automated temperature control system in a passenger car.

TYPE KU/UD 20 Unleaded Disc
A range of unleaded disc thermistors.

Air Quality Sensor

This sensor monitors the air coming into a vehicle.

Dual Solar Sensor
The dual solar sensor uses two photo diode cells inside of it to measure the intensity of the light that enters into the cabin of a vehicle.

Oil Pressure Switch
The oil pressure switch monitors the engine oil flow when the engine starts.

Duct Sensor
This sensor measures the temperature inside the air duct of air conditioner systems.

Type S/AS/ES Precision NTC Temperature Standards
Our temperature standards consist of ultra-stable thermistor probes assembled into thin wall stainless steel housings with shielded extension leads.

Ambient Sensor
This sensor measures the temperature outside the passenger compartment and is usually mounted inside or near the front bumper.

E-stat Controller
The E-stat controller is used to prevent the evaporator core from freezing.

Water Temperature Sensor
The Water temperature sensor indicates the ambient temperature of the automatic air conditioner system in the passenger car.

Single Solar Sensor
The single solar sensor uses outside sunlight coming into the vehicle to help control the vehicle’s HVAC system.