Print

PDCR/PMP 4300 Automotive Pressure Transducer

PDCR/PMP 4300 – Automotive Pressure Transducers

 

The PDCR/PMP 4300 is the latest in the range of products that for many years has been "fine tuned" in design to suit all chassis and engine pressure measurement requirements.

APX Analyzer Specifications

  • Race proven technology
  • High temperature capability +175°C
  • Amplified or millivolt output
  • Stainless steel or Titanium construction
  • Fully EMC protected
  • Flexible mechanical/electrical interface options

Pressure Measurement

Pressure Ranges

25, 45, 145, 217, 435, 1160, 1810, 3625 psi absolute (1.6, 3, 10, 15, 30, 80, 125 and 250 bar absolute)

Note: Any engineering pressure unit can be specified. Custom pressure ranges available.

Overpressure 2 x rated pressure or 4525 psi (312 bar) maximum for stainless steel
2 x rated pressure for titanium, 5800 psi (400 bar) max
Pressure Containment 5440 psi (375 bar) max for stainless steel 7000 psi (500 bar) max for titanium units
Media Compatibility Fluids compatible with stainless steel 316L or titanium IMI 160.
Fluids classification in accordance with pressure equipment directive 97/23/EC
Excitation Voltage

PDCR 4300:
10 VDC nominally (other regulated DC excitation levels can be specified)

PMP 4300: 1
2 V ±4 VDC, unregulated at 70°F (20°C) 10V to 16 VDC, unregulated -25° to 350°F (-30° to 175°C)

Supply Current PDCR 4300: <2 mA PMP 4300: <5 mA
Resolution Infinite
Zero Offset

PDCR 4300: 0 mVDC ±3 mVDC

PMP 4300: 0.2 VDC ±50 mVDC

Span Setting

PDCR 4300: 50 mVDC ±3 mV (output ratiometric to supply)

PMP 4300: 4.7 VDC ±50 mVDC Alternatives available.

PDCR/PMP 4300 – Spec Diagram

Performance Specifications

Accuracy

PDCR 4300:

  • ±0.2% full scale (FS) Best Straight all ranges

PMP 4300:

  • ±0.1% full scale (FS) Best Straight Line (BSL) for ranges up to (and including) 870 psi (60 bar)
  • ±0.2% FS BSL for ranges above 870 psi (60 bar)
Long Term Stability <0.1% FS/year
Operating Temperature Range
  • 25° to 350°F (-30° to 175°C)
Compensated Temperature Range -25° to 350°F (-30° to 175°C) Alternative temperature ranges available.
Thermal Performance

PDCR 4300:
Thermal zero/span shift : <±1.5% FS/210°F (100°C)

PMP 4300:
Thermal Zero/Span shift : <±1% FS/210°F (100°C)

Temperature Signal Output (Optional)

PDCR 4300: 1.5 VDC ±1 VDC at 70°F (20°C)

PMP 4300: 2.9 VDC ±0.5 VDC at 70°F (20°C)

Temperature Signal Sensitivity (Optional)

PDCR 4300: 3 mV/°C ±2 mV/°C

PMP 4300: 7 mV/°C ±1 mV/°C

Insulation Resistance >100 M Ω at 50 VDC
Output Impedance

PDCR 4300: 2 k Ω nominal

PMP 4300: <100 Ω

Physical Specifications

Pressure Connection Select from the following standard fittings (all male fittings): M8 x 1, M10 x 1, M10 x 1 snubber, 5/16 in - 24UNJF, 3/8 in - 24UNJF, 1/8 in NPT, 1/8 in BSP,
Alternatives available.
Electrical Connection
  • 3.28 ft (1 m) of 5 core Raychem cable spec EPD 96401A
  • 5 pin Deutsch Hermetic AS-Micro
  • 3.28 ft (1 m) of 5 core Raychem cable spec EPD 96401A and 5 pin Deutsch Hermetic AS-Micro
Installation Torque

10 Nm will produce negligible zero offset Weight

PDCR 4300:
AS micro stainless steel: <1 oz (28 g)
AS micro titanium: <0.5 oz (16 g)
Cable and stainless steel: <1.8 oz (53 g) Cable and titanium: < 1.5 oz (43 g)
Cable versions quoted with 40 in (1 m) of cable.

PMP 4300:
AS micro stainless steel: <1 oz (30 g)
AS micro titanium: <0.6 oz (19 g)
Cable and stainless steel: <2 oz (57 g)
Cable and titanium: <1.5 oz (45 g)
Cable versions quoted with 40 in (1 m) of cable.

Vibration 50 to 2500 Hz @ 40g, 8 hours per axis, logarithmic sweep at a rate of 0.32 octaves/minute with no effect on calibration
Shock 1000 g 1 mS half sine pulse in all three axes with no effect on calibration
EMC CE mark statement "CE marked for electromagnetic compatibility"

Descriptions English
PDCR/PMP 4300 Brochure PDCR/PMP 4300 Brochure
PDCR/PMP 4300 Manual Brochure PDCR/PMP 4300 Manual Brochure


acrobat-reader