- Sources and reads mA, mV, ohms, frequency and pulses
- Simulates and reads 8 RTDs and 12 thermocouples
- 32 IDOS® ‘Plug-N-Play’ Pressure modules from 10 inH2O to 10,000 psi ( 25 mbar to 700 bar)
- Simultaneous dual reading capability
- Automatic switch test and pressure leak test
- 24 V loop power supply
- Data logging option
- Compact, simple to use, easy to carry
- Convenient one hand operation
- Test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch, trip and alarm verification
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
The DPI 880 Multi-function Calibrator is an ultra compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. It measures, sources and simulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.
|Simultaneous dual readings
||Reads both input and output parameters simplifying calibrations and system diagnostics. Calibration values are captured on one screen and adjustments are seen in real time, for example, when making zero and span adjustments.
|Programmable step and ramp outputs
||Quickly step through calibrations with the %Step output or make zero and full scale adjustments using Span Check. The Ramp output is ideal for delicate analogue meters, rate of change indicators and checking valve travel and slew rates.
|Adjustable nudge output
||Provides small incremental output changes for accurately setting valve positioners, switches, trips, and alarms.
|Automatic switch test
||Captures open/closed trip values providing a fast and highly accurate "safety system" check.
||Can be switched into the loop when required for a HART digital communicator avoiding the inconvenience of carrying a 250 O resistor.
|24V loop power supply
||Energises transmitters and control loops.
|Automatic detection of 2, 3 and 4 wire RTDs
||Quickly detect damaged sensors and faulty wiring that could otherwise be missed or cause system inaccuracy.
|Thermometer with wide probe compatibility
||Compatibility with 8 RTDs and 12 thermocouples allows probe selection for any thermometer application, e.g. general purpose, high temperature, hygienic and aggressive media.
Measures or sources Hz, kHz, CPM and CPH providing a highly accurate calibration standard and versatile test tool for process technicians and electronic engineers. Dedicated features facilitate test and maintenance of electronic circuits, frequency/flow meters, batch counters, tachometers, and motion pickups.
||Detects the best value regardless of waveform or amplitude.
Intelligent Digital Output Sensor (IDOS) Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar). IDOS modules are Plug & Play requiring no instrument calibration or set-up to provide a fully featured pressure calibrator.
|Standard and Premier accuracy
||Standard accuracy from 0.05% FS includes operation over 32°F to 122°F (0°C to 50°C), one year stability and calibration uncertainty. The Premier range provides laboratory grade precision to 0.01% FS.
||IDOS modules can be used with any compatible instrument carrying the IDOS logo; for example, the DPI 800 series and DPI 150.
IDOS Universal Pressure Modules
|*IDOS UPM-S Standard Accuracy
||Total accuracy over 32°F to 122°F (0°C to 50°C) and one year stability.
|*IDOS UPM-P Premier Accuracy
||Precision over 65°F to 82°F (18°C to 28°C). Option A) Negative calibration for Premier ranges
||G 1/8 female or 1/8 NPT female
Please refer to IDOS UPM data sheet for full specification
||4mm sockets and mini-jack thermocouple socket
||50°F to 86°F (10°C to 30°C) unless otherwise stated
||14°F to 122°F (-10°C to 50°C) unless otherwise stated Temperature coefficient 14°F to 50°F, 86°F to 122°F 0.0017%FS/°F (-10°C to 10°C, 30°C to 50°C 0.003%FS/°C) For ohms 14°F to 50°F, 86°F to 122°F 0.0028%FS/°F (-10°C to 10°C, 30°C to 50°C 0.005%FS/°C)
||-4°F to 158°F (-20°C to 70°C)
||0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III
|Shock and Vibration
||BS EN61010:2001, Def Stan 66-31, 8.4 Cat III
||BS EN61326-1:1998 + A2:2001
||Electrical BS EN61010:2001. Pressure Equipment Directive (PED), Class SEP. CE marked
||Graphic LCD with backlight.
|Size (l x w x h) and Weight
||7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 15 oz (425 g)
||3 AA alkaline, >50 hours measure, >10 hours 24V source
|DPI 880 Brochure
|Druck DPI 880 Multi-function calibrator User Manual