||Altitude: ft, meters
Airspeed: knots, km/hr, mph
Rate of Climb: ft/min, m/min, m/s, hm/s
Others: mbar, inHg, inH2O, mmHg, kPa, hPa, psi
||Roc: Rate of Climb
Rt Ps: Rate of Static
Rt Pt: Rate of Pitot
Rt Qc: Rate of Pt_Ps
Rt CAS: Rate of calibrated airspeed
Rt EPR: Rate of engine pressure ratio
||Negligible calibration change with up to 1.25 x full scale (FS) overload applied.
||Better than 0.005% (Ps) and 0.08% (Qc) FS per annum.
||Simple keypad instruction. 12 month interval suggested. Use of primary standard pressure reference (e.g. Ruska Primary Pitot Static Tester model 2468) is recommended.
||Large area, 1/4 VGA, high contrast, electro-luminescent display. 96 mm x 73 mm (3.7 in x 2.8 in), 320 x 240 pixels.
||Two readings-per-second display value update.
100/120/230 Vac, 50/60 Hz, Power - 200 VA
115 Vac, 400 Hz, Power - 200 VA
|Power Failure Protection
||System locks, and a manual let-down feature is provided.
||Integral test routines and reporting for both electrical and pneumatic systems.
||Calibrated: 5°C to 35°C (41°F to 95°F)
Operating: 0°C to 50°C (32°F to 122°F)
Storage: -20°C to 70°C (-4°F to 158°F)
||Weatherproof in operating mode (lid removed).
||0 to 95% non-condensing. “Tropicalized” specification.
||Designed to meet MIL-T-28800 Class 2.
||EN61010, EN61326. CE marked.
||Weight 15 kg (33 lb) nominal
Dimensions (including lid): 265 mm x 520 mm x 355 mm (10.4 in x 20.5 in x 14 in)
||ABS moulded case with removable lid and storage for accessories.
||AN4 for Ps and Pt, both color-coded.
Supplied with mating (approximately) 2 m (6 ft) long flexible hoses with AN4 fittings at one end.
||Integral pressure and vacuum pumps capable of generating the following supply rates:
1829 m/min (6000 ft/min) into a 4 litre volume at 9144 m (30,000 ft)
300 knots/min into a 2 litre volume at 650 knots
Water/moisture content is vented automatically.
||AC power lead—2 m (6 ft) length approximately. Ps and Pt hoses—2 m (6 ft) lengths approximately. Operators manual and calibration certificate also supplied as standard.
||Instruments manufactured by GE are calibrated against precision calibration equipment traceable to international standards.