Pressure & Level Overview
Designing and manufacturing high-performance pressure measurement equipment; controllers, calibrators, transducers and transmitters for a wide range of applications, we have one of the most comprehensive and technologically advanced silicon processing facilities in the world. We are one of only a few companies converting raw silicon into finished sensors and guages by employing techniques such as micromachining. Multi-disciplined engineering teams are experienced in the use of a wide range of materials, hybrids, ASICs, microprocessors, and surface-mount technology.
Pressure & Level Measurement Products
Portable Calibrators
DPI 620
The DPI 620 is an ultra-compact electrical, temperature and frequency calibrator and HART communicator.
DPI620IS
The DPI 620 is an ultra-compact electrical, temperature and frequency calibrator and HART communicator approved to ATEX and IECEx for use in hazardous areas.
PV 621, 622 & 623 Pressure Stations
These three pneumatic/hydraulic pressure generation stations are also available in ATEX approved versions for stand- alone use in hazardous areas.
DPI 610/615 Series
The technically advanced DPI 610 and DPI 615 portable calibrators are the culmination of many years of field experience with the company.
Handheld Test Tools
DPI 104 Test Gauge
This microprocessor-controlled digital pressure gauge combines precision and functionality in a compact and simple-to-use package.
DPI 104IS
The DPI 104IS is an intrinsically safe version of the microprocessor-controlled DPI 104-digital pressure gauge.
DPI 705 Series
The Druck DPI 705 Series of handheld pressure indicators combine tough and rugged design with accurate and reliable pressure measurement.
DPI 740 Series
The DPI 740 is a portable battery powered precision barometer, providing outstanding capabilities in a hand-held package.
DPI 800/802
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments.
DPI 811/812
The DPI 811 RTD calibrator measures or simulates RTD sensors and is the ideal tool for checking probes, indicators, recorders and controllers.
DPI 821/822
The DPI 821 thermocouple calibrator measures or simulates sensors and is the ideal tool for checking probes, indicators and controllers.
DPI 832
The DPI 832 electrical loop calibrator is a compact, easily portable solution for your loop calibration needs.
DPI 841/842
The DPI 841/842 frequency/loop calibrator is the ideal instrument for process technicians and electronic engineers.
DPI 880
The DPI 880 multi-function calibrator is virtually a calibration lab in the palm of your hand.
UPS II Loop Calibrator
The UPS II loop calibrator is an advanced handheld process calibrator tool.
UPS-III Loop Calibrator
Measuring 3” x 5” and weighing just 9.7 ounces, the UPS III loop calibrator fits comfortably in a shirt pocket.
Transducers/Transmitters
TERPS sensors
A brand new technology for pressure sensor that are 10 times more accurate and stable than standard silicon sensors, improving your performance, enhancing your safety and cutting your costs in almost any pressure sensitive applications.
UNIK 5000
Configurable platform, offering high performance and bespoke design on a short lead time.
RTX 1000
High accuracy, HART communication pressure transmitter. Ideally suited for process market.
STX 2100 Series
Differential pressure transmitter, complements the RTX 1000 Series.
PTX600 Series
Low noise, fast response and robust pressure transmitter family. Ideally suited for process market.
DPS 4000
State of the art CANbus output pressure transducer.
PDCR/PMP 4300
Miniature, high temperature and high performance transducer. Ideally suited for motor sport applications.
PTX/PMP 1200
Complete range of pressure transmitters designed to optimize the relationship between price and performance.
PTX/PMP 3000
Flight certified pressure transducer family.
PTX 661
Mud sensor designed for use in extremely harsh environments where high shock and vibration is likely to be encountered.
T Series Transmitter
This family of differential pressure transmitters measures low pressure and offers a variety of analog signal outputs.
PTX 300 Subsea Series
Pod sensors developed for the offshore oil and gas industries.
PTX 400
Wellhead series of pressure and/or temperature transmitters.
LPM/LPX1000 Series
High accuracy, low pressure wet/wet differential pressure transmitter. Ideally suited for clean room and HVAC monitoring and control.
W Series Transmitter
The Series W pressure transmitters are designed to measure low differential pressures of liquids or gases.
M Series Transmitter
The M Series measures low pressures and features Type 4 certification with a variety of signal outputs and minimal power consumption.
RPT Series
Highly stable, ultimate accuracy resonant sensors with pressure ranges up to 3.5 bar.
RPT350
Ultimate accuracy sensors with RS232/485 output.
RPT410
Ultimate accuracy resonant barometric sensor used in air data flight/test and wind tunnels.
8000 Series
The ultimate accuracy resonant pressure sensor. Built around new TERPS technology, it offers higher pressures and a more robust design than ever before.
Depth and Level
-
TERPS sensors
A brand new technology for pressure sensor that are 10 times more accurate and stable than standard silicon sensors, improving your performance, enhancing your safety and cutting your costs in almost any pressure sensitive applications.
SLP20 Submersible Level Probe
Fully submersible level measurement solution, suitable for a wide variety of applications, from single tanks to multiple point installations.
PTX/PDCR 1830 Series
Fully submersible high-performance sensors for measurement of hydrostatic liquid levels.
PTX 1290 Series
The 1290 Series submersible/depth pressure transducers are specifically designed for the wastewater, pump/lift station application.
PTX/PDCR 1730 Series
This hydrostatic liquid level sensor is designed to work in low powered, arduous applications including surface water, ground water and tank level.
UNIK 5000
Configurable platform, offering high performance and bespoke design on a short lead time.
Subsea Detection
Sharing a commitment to technology and innovation, PRESENS joined GE on 1st August 2012.
Air Data Test Sets
ADTS 403
This rugged, long life pressure and vacuum supply unit is designed for use with air data test systems.
ADTS 206
The ADTS 206 a rugged, lightweight 3-channel air data test set.
ADTS 405
The ADTS 405 is a twin-channel Ps and Pt pressure control system used for the precision calibration/verification of aircraft pitot statics.
ADTS 505
This Air Data Test Set is the latest in a series of reliable, compact and high accuracy Air Data Test Sets.
Hand Pumps
PV210
The PV 210 low pressure pneumatic hand pump is fully portable, easy to use and generates pneumatic pressures in excess of 3000 mbar.
PV211
The PV 211 pneumatic hand pump is a lightweight, high quality combined pressure and vacuum hand pump.
PV212
The PV 212 hydraulic hand pump is lightweight, easy to use and generates pressure up to 1000 bar.
PV411A
The PV411A is a four-in-one hand pump providing functionality never before seen in a hand held pressure source.
HTP1 Test System
This test system is lightweight, easy to use and can generate pressures up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi.
LTP1
-1 to 3bar / 45psi Pneumatic Pressure and Vacuum.
TP1-40
This system can be used for calibration checks on transmitters, switches, indicators, recorders and controllers.
TPC1 Multi-function Hand Pump
The revolutionary TPC1 multi-function pressure generator is used for generating vacuum, gas and hydraulic pressures from a few mbar up to 700 bar.
IDT 600-1/600-2
The IDT 600 dirt moisture trap is an effective barrier for protecting portable pressure calibrators against the ingress of dirt and moisture.
PV 621, 622 & 623 Pressure Stations
These three pneumatic/hydraulic pressure generation stations are also available in ATEX approved versions for stand- alone use in hazardous areas.
Software
4Sight Calibration Management Software
4Sight provides a flexible information system with tools for managers to plan review and adapt their maintainance workflow
Intecal
Intecal is designed to automate calibration management for a wide range of Druck instruments.
|
|
