Print

 

Saudi Aramco Upgrades Gas/Oil Separation Plant with GE’s Advanced Compressor Control Technology


  • First Compressor Control Project in the Kingdom for GE’s Measurement & Control Business
  • Features Mark* Vle System with OptiComp Compressor Control Software
  • Haradh Facility Plays Key Role in Saudi’s Oil and Gas Industry


JEDDAH, SAUDI ARABIA—May 20, 2013—GE (NYSE: GE) has replaced an aging compressor control system at Saudi Aramco’s Haradh gas/oil separation plant in Saudi Arabia’s Eastern Province with advanced technology that automates the control process for three compressors and will improve performance and production. The new system was commissioned earlier this year and is operating successfully at the plant. This marks the first compressor control project with Saudi Aramco for GE’s Measurement & Control business, building upon GE’s past experience of providing turbine and generator controls for the company.

 

Haradh GOSP-1 is a critical plant for Saudi Aramco, and its three motor-driven compressors play a vital role by maintaining the compression of the gas after it is separated from the oil. The previous compressor control system used programmable logical controllers, which GE replaced with Mark VIe technology, along with GE’s OptiComp compressor control algorithms and remote control capability from the plant’s existing distributed control system.

 

“As the world leader in the production of petroleum-based energy, we at Saudi Aramco hold ourselves to the highest standards of excellence and have very specific requirements when it comes to compressor control and protection,” said Ahmad Saleh Haradh, GOSP1 Saudi Aramco project engineer. “From the start, GE worked closely with us to understand our unique needs and specifications and remained flexible throughout the entire project. The updated control system is now in full operation and is satisfying all of our performance expectations.”

 

“Saudi Aramco is a key partner of GE, and we demonstrated to them our ability to meet their specific program requirements through extensive demonstrations and testing of our solution from the very beginning. Robust planning and our close partnership with the Saudi Aramco team led to the smooth installation of a highly customized control package within a short timeframe. This project adds to our proven experiences and successes in the region where we have over 80 years of presence and a strong understanding of local industry needs,” said Rami Qasem, president and CEO, GE Oil & Gas, Middle East, North Africa and Turkey.

 

The solution features GE’s Mark Vle control platform with OptiComp control software and provides capabilities such as anti-surge, motor limit, pressure control, discharge pressure and pressure override control. GE also saved significant plant space by building a single platform to control all three compressors (two high-pressure compressors running in parallel and one low-pressure compressor running in series). Additionally, GE performed surge tests on all units to help ensure optimal compressor performance. These tests enabled GE to enhance the performance of the low-pressure compressor and reduce degradation, ultimately expanded the operating envelope for that compressor.

 

Saudi Aramco, the national oil and gas company, is a fully integrated, global petroleum enterprise and a world leader in the exploration, production, refining, distribution, shipping and marketing of oil and gas. The company manages proven conventional reserves of 260 billion barrels of oil and manages the fourth largest gas reserves in the world, 263 trillion cubic feet.

 

About GE

GE (NYSE: GE) works on things that matter. The best people and the best technologies taking on the toughest challenges. Finding solutions in energy, health and home, transportation and finance. Building, powering, moving and curing the world. Not just imagining. Doing. GE works. For more information, visit the company's website at www.ge.com .

 

About Measurement & Control

Measurement & Control is a leading innovator in advanced, sensor-based measurement; non-destructive testing and inspection; flow and process control; turbine, generator, and plant controls; and condition monitoring. Providing healthcare for our customers’ most critical assets, we deliver accuracy, productivity and safety to a wide range of industries, including oil & gas, power generation, aerospace, metals and transportation. Headquartered in Boston, USA, Measurement & Control has more than 40 facilities in 25 countries and is part of GE Oil & Gas. www.ge-mcs.com .

 

 

*Trademark of General Electric Company

 

For more information, contact:

Jumanah Anter
Regional Communications Leader, MENAT
GE Oil & Gas
+97144296329
This email address is being protected from spambots. You need JavaScript enabled to view it. '; document.write(''); document.write(addy_text46146); document.write('<\/a>'); //-->\n This email address is being protected from spambots. You need JavaScript enabled to view it.

 

MB Hodgkiss
GE
+1 978 944 1982
This email address is being protected from spambots. You need JavaScript enabled to view it. '; document.write(''); document.write(addy_text92045); document.write('<\/a>'); //-->\n This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Jill Queenan
InkHouse, for GE
+ 1 781 966 4112
This email address is being protected from spambots. You need JavaScript enabled to view it. '; document.write(''); document.write(addy_text53862); document.write('<\/a>'); //-->\n This email address is being protected from spambots. You need JavaScript enabled to view it.