Weld Inspection Probes
Weld inspection probes are used to detect surface breaking defects in ferrous welds. We offer straight, 90º inline tip, and 90º right angle tip and broad band probes (paint probes) [absolute] for the estimation of coating thickness prior to weld inspecttion.
WeldScan (Differential Bridge)
The WeldScan line of probes offer a cost-effective alternative to Magnetic Particle Inspection for in-service inspection of ferrous welds. WeldScan probes are also available for non-ferrous welds and waterproof models.
Weldscan Straight
| Part Number | Diameter | Frequency | Length | Body | Connector |
| 800P01MD1P |
9.5 mm |
100kHz |
5.0 m |
Straight |
12-way Lemo |
| 800P01ND1P |
9.5 mm |
100kHz |
5.0 m |
Straight |
7-way Lemo |
| 800P04MD1P |
16 mm |
100kHz |
5.0 m |
Straight |
12-way Lemo |
| 800P04ND1P |
16 mm |
100kHz |
5.0 m |
Straight |
7-way Lemo |
| 800P06MD1P |
32 mm |
100kHz |
5.0 m |
Straight |
12-way Lemo |
WeldScan 90º Inline Tip
| Part Number | Diameter | Frequency | Length | Body | Connector |
| 801P01MD1P |
9.5 mm |
100kHz |
5.0 m |
90º Inline |
12-way Lemo |
| 801P04MD1P |
16 mm |
100kHz |
5.0 m |
90º Inline |
12-way Lemo |
| 801P06MD1P |
32 mm |
100kHz |
5.0 m |
90º Inline |
12-way Lemo |
WeldScan 90º Right Angle Tip
| Part Number | Diameter | Frequency | Length | Body | Connector |
| 802P01MD1P |
9.5 mm |
100kHz |
5.0 m |
90º Right Angle |
12-way Lemo |
| 802P04MD1P |
16 mm |
100kHz |
5.0 m |
90º Right Angle |
12-way Lemo |
| 802P06MD1P |
32 mm |
100kHz |
5.0 m |
90º Right Angle |
12-way Lemo |
Broad Band Probe (Paint Probe) [Absolute]
Used to estimate the coating thickness prior to weld inspections.
| Part Number | Frequency | Inductance | Material |
| 130P3 |
35kHz - 250kHz |
82ųH |
Fe/NFe |
Cables (to suit above Probe)
| Instruments | Part Number | Cable Type |
| Vector 22 |
5A011 |
BNC/BNC |
| Locator 2/2s |
39A002 |
7-way Lemo/BNC |
| Locator 3s, Phasec 2s/2d |
40A002 + 5A011 |
12-way Lemo Adapter/
BNC-BNC |
| Locator 3s, Phasec 2s/2d |
40A504 |
12-way Lemo/BNC |
