GE Measurement & Control SolutionsGE Measurement & Control Solutions

Glossary of terms used on this site

Alle | B | C | D | E | F | G | I | M | N | O | R | S | T | V | W | X

X

Begriff Definition
X-ray film

A photographic film used to generate a visual X-ray image. X-ray films provide very good spatial resolution and contrast, but need long exposures times and need to be chemically processed. Moreover, they cannot be digitally processed.

X-ray generator

Supplies heating current and both acceleration and grid voltage for the X-ray tube. It is crucial that grid voltage is smooth and stable to prevent defocussing and chromatic aberrations (unsharpness).

X-ray parameters

Tube voltage* and tube current*.

X-ray spectrum

The distribution of the energy (wavelength, frequency) of the X-ray photon emerging from an X-ray source. Typically the spectrum of an X-ray tube consists of the continuous bremsspectrum (s. bremsstrahlung), which is superimposed by the lines of the characteristic spectrum.

X-ray tube

Device for the production of X-rays. An evacuated tube in which a swift electron beam is generated by an electron gun setup and then stopped by an anode. The deceleration of electrons leads to the emission of electromagnetic radiation, namely X-radiation. As opposed to conventional X-ray tubes, where the anode of the electron gun is also the target, in nanofocus and microfocus* X-ray tubes, the electron beam is transmitted trough a hole in the anode where it is then focussed onto a small spot on the target. This way, a very small but bright X-ray source is produced. Depending on the type of tube housing, we differentiate between two types of X-ray tubes: open and sealed tubes. Either one can be outfitted with either a directional* or transmission* type target.

X-ray tube, open

See open X-ray tube*

X-ray tube, sealed

See sealed X-ray tube*

X-ray yield

The X-ray yield is the percentage of tube power* transformed into X-ray radiation. The main part of the tube power is used for warming up the target. An increase in tube voltage results in a linear increase in X-ray yield. Also important in this context is the atomic number of the target material: The higher the atomic number, the better the X-ray yield. Hence, target materials with high atomic numbers, such as tungsten, should be used. Under a tube voltage of 100kv, tungsten provides an X-ray yield of 0.7%.

X-rays

X-rays are a form of electromagnetic radiation with a wavelength in the range of about 10-9m (1 nm) to 6 x 10-12m (6 pm), or frequencies in the range of 3 x 1017Hz to 5 x 1019Hz and photon energy between 1.2 keV and 240 keV. The most common way of producing X-rays is by bremsstrahlung* (German for braking radiation). Another type of X-rays is produced by the inner, more tightly bound electrons in atoms (characteristic radiation). For more information on the generation of X-rays, please see X-ray tube.